The car Tyre Inflators is also called the air pump, the air pump, and the air pump works by the operation of the motor. When the air is pumped, the valve of the connector is flushed by the atmospheric pressure, the air enters the air cylinder, and when the air is pumped into the tire, the valve It is turned off by the air pressure in the cylinder, and the gas enters the tire. It can be considered that the principle of atmospheric pressure is used to inflate cars, balls, and rubber boats.

Features are as follows:

1. High output pressure: the pressure can reach 560Mpa

2. Wide range of use: the working medium can be hydraulic oil, water and most chemically corrosive liquids, with high reliability and long maintenance-free life.

 

3. Wide output range: all types of pumps only need a small air pressure to work smoothly. At this time, a small flow rate can be obtained, and different flow rates can be obtained after adjusting the air intake.

4. Flexible application: different types of pumps can be selected to obtain different pressure areas.

5. Easy to adjust: within the pressure range of the pump, adjust the regulating valve to adjust the intake pressure, and the output hydraulic pressure is correspondingly infinitely adjusted.

6. Automatic pressure maintenance: No matter what the reason is, the pressure of the pressure maintaining circuit will drop, it will automatically start, supplement the leakage pressure, and keep the circuit pressure constant.

7. Safe operation: gas driven, no arc and spark, can be used in dangerous places.

8. Simple maintenance: Compared with other air-driven pumps, the booster pump can complete the same work, but it has fewer parts and seals, and is easy to maintain.

9. Cost-effective: The booster pump is a plunger pump, and the booster pump reciprocates rapidly during work.