1. Pay attention to safety when inflating. Always check the air pressure with an air pressure gauge to avoid bursting the tire due to over-inflation.

2. Heat dissipation first and then inflate. After the vehicle is stopped, it is necessary to wait for the tire to dissipate heat before inflating it, because the temperature of the tire rises when the vehicle is running, which affects the air pressure.

3. Check the valve. If the valve nozzle and valve core are not smooth, there are protrusions and recesses and other defects, they cannot be inflated and the air pressure can be measured.

4. Pay attention to cleaning when inflating. The inflated air must not contain moisture and oil to prevent deterioration or damage to the inner tube rubber.

5. Do not exceed the standard too much. When inflating, you should not deflate too much after exceeding the standard, and do not inflate too much because you cannot inflate for a long time. If too much exceeds the standard, the cord will be overstretched and the service life of the tire will be affected.

6. Check for air leakage. Before inflating, the dust on the valve should be wiped clean, and the valve core should not be loosened. After the inflation, soap and foam water should be applied to the valve to check for air leakage. Tighten the valve cap to prevent sediment from entering the inside of the valve.

The air pump can inflate the tires quickly and safely. There is no need to worry about the tire pressure level, air leakage, tire blowout and other faults during driving, which greatly guarantees safe driving and eliminates hidden dangers.
Related product: Car Tyre Inflators